Stone Cleaning Berlin - Material-Specific Care for Marble, Granite, Sandstone & Slate
Natural stone rewards the right method and punishes the wrong one. Immo-Clean GmbH identifies stone type on site, then applies pH-matched chemistry, low-pressure mechanics, and optional impregnation to marble, granite, sandstone, and slate. Tariff-bound permanent staff preserve colour, slip resistance, and value for hotel lobbies, façades, and heritage buildings.

Stone Cleaning Berlin - Material-Specific Care for Natural Stone
Tariff-bound permanent staff, pH-matched chemistry, and optional impregnation keep marble, granite, sandstone, and slate looking their best. Test areas document compatibility before any full deployment.
- Stone typesMarble · granite · sandstone · slate · terrazzo · concrete stone
- MethodStone-type identification and pH-matched chemistry
- ProofDocumented test areas before full deployment
- ExtraOptional hydrophobic impregnation
Our complete pricing structure with minimum order values, area tiers, and service packages is available on our Pricing page. A binding fixed-price quote is prepared after a free site survey.
Stone Cleaning Berlin - Material-Specific Care for Natural & Cast Stone
The Stone Cleaning Berlin service from Immo-Clean GmbH covers marble, granite, sandstone, slate, terrazzo, and concrete stone across interiors, façades, and outdoor paving. Stone-type identification, pH-matched chemistry, and an on-site site manager ensure that heritage and modern surfaces receive verifiable, value-preserving care.
Stone-type identification before cleaning
We test a hidden area on site with reagent drops and visual inspection. Marble and limestone react differently to acids than granite and slate. The result determines whether we use a pH-neutral, acidic, or alkaline cycle - preventing permanent etching and protecting grout, seals, and finishes.
Standards and heritage coordination
DIN EN 13549 benchmarks guide our quality loops. For heritage surfaces, we coordinate with the relevant heritage authority and document material identification. We also follow BIV guidance and use pH-neutral agents where the surface and stone type require them.
A dedicated site manager on site
We appoint a dedicated site manager for every project. This person performs the stone-type identification, supervises the team, and is the first contact for the property manager - on site for the full duration of larger projects. Regionally, we serve properties across every Berlin district - from Berlin-Mitte through Charlottenburg and Pankow to Spandau and Köpenick. A complete overview is available on our Berlin service areas page.
Documented results and complementary services
We use before/after photography per zone, with timestamps. Property managers receive a written report that includes the stone-type test result, the agent selected, and any optional impregnation applied. Our facade cleaning in Berlin, floor cleaning in Berlin, and basic cleaning in Berlin complement this service.
Stone Cleaning in All Berlin Districts & Brandenburg
The Stone Cleaning Berlin service from Immo-Clean GmbH is delivered by trained teams in all 12 Berlin districts and the surrounding area. From Berlin-Mitte through Charlottenburg, Friedrichshain, and Kreuzberg to Spandau and Köpenick, we serve property managers, hotel lobbies, and heritage buildings with documented material identification and on-site quality rounds. Fixed teams are also available in Pankow, Neukölln, Wilmersdorf, Schöneberg, Tempelhof, and Steglitz. A complete overview is available on our Berlin service areas page.
Berlin-Mitte & Eastern Districts
In Berlin-Mitte we restore hotel-lobby marble and historic sandstone portals, in Friedrichshain new-build facades with efflorescence issues, in Lichtenberg industrial concrete floors, and in Hellersdorf and Marzahn large mosaic estate entrances.
Kreuzberg, Neukölln & Northern Districts
Stone cleaning in Kreuzberg addresses historic terrazzo staircases around SO36, while stone cleaning in Neukölln covers restaurant tile floors around Hermannplatz. Pankow with Prenzlauer Berg and Reinickendorf in the north-west complete our coverage of the city.
Charlottenburg-Wilmersdorf & City West
In City West we serve Charlottenburg granite entrance areas around Kurfürstendamm, Wilmersdorf travertine apartment floors around Olivaer Platz, and Schöneberg historic Bavarian Quarter buildings.
South, West & Brandenburg
In southern Berlin we cover Tempelhof spa wet areas, Steglitz sandstone portals, Zehlendorf villa floors, Lichterfelde, and Treptow. In the west we serve Spandau; in the south-east, Köpenick and Adlershof. Beyond Berlin, we also serve Potsdam and the entire state of Brandenburg.
Further Stone Cleaning Services
Stone Cleaning for Every Stone Surface in Berlin
Stone surfaces appear in many settings. We match method, agent, and interval to the specific use of each zone.
Hotel & Hospitality
Lobby marble, reception granite, and spa natural-stone wet areas receive periodic polishing, crystallisation, and impregnation to keep surfaces presentable.
Heritage Building
Material-friendly methods for listed sandstone portals, terrazzo staircases, and historic floors - coordinated with heritage authorities.
Office Tower
Granite entrance areas, marble lift lobbies, and travertine floors are cleaned nightly for a presentable start to every working day.
Retail & Shopping Centre
Polished stone floors in malls and atriums are crystallised on documented cycles that keep gloss lasting through peak traffic.
Restaurant & Gastronomy
Grease and stains are removed from tiled and stone floors while protecting the grout - suited for kitchens, dining rooms, and guest toilets.
Medical Practice
Stone reception floors and natural-stone wet areas are cleaned with pH-neutral, RKI-aligned methods.
Residential Building
Travertine apartment floors, marble staircases, and terrace paving receive routine and intensive care without surface damage.
Façade & Outdoor Paving
Sandstone, brick, clinker, and concrete façades are cleaned by low-pressure mechanics - preserving structure and original colour.
Gallery & Museum
Highly sensitive stone floors and plinths receive dust-free, material-friendly care aligned with conservation standards.
Industrial & Logistics
Heavy-duty concrete floors are degreased and sealed for easier ongoing maintenance in warehouses and production halls.
Stone Types, Agents, and Methods We Use
Choosing the right method protects structure, colour, and slip resistance. Before any full deployment, we test the substrate, the soil, and material compatibility.
Marble & Limestone
Calcareous stone - pH-neutral maintenance cleaners only. Acids etch within seconds. Diamond grinding, polishing, and crystallisation bring back original gloss.
Granite & Basalt
Acid-tolerant igneous stone. Impregnation reduces future staining by up to 70% without changing the polished or honed appearance.
Sandstone & Brick
Soft, porous sedimentary stone - low-pressure mechanics only. Strong agents loosen the surface and alter the colour depth.
Terrazzo & Cast Stone
Composite stone with binder - matched chemistry preserves the binder and the aggregate. Routine polishing keeps the surface uniform.
Stone Cleaning in Eight Clear Steps
From the initial survey to documentation, responsibilities, intervals, and quality targets remain transparent.
- Stone identification: we identify the stone type through reagent drops, visual inspection, and a documented test on a hidden area.
- Every zone is recorded with its stone type, finish, method, agent, and defined result in a clear service specification.
- The site manager divides the property into understandable zones, plans routes, equipment stations, and time windows.
- A fixed team is briefed on stone sensitivity, house rules, safety requirements, and heritage constraints before deployment.
- Diamond pads, polishers, crystallisers, and matched agents are prepared for the specific stone type of each zone.
- The team works to the agreed schedule and documents areas completed, agents used, and any unusual findings.
- An invisible hydrophobic impregnation is applied where extra protection against water, oil, and graffiti is required.
- Before/after photos, stone-type tests, and monthly reports give property managers a reliable overview at all times.
What Determines the Price? An Illustrative Calculation
Stone cleaning is not charged as a flat rate per m²; stone type, area, and finish all matter. The following values are non-binding guidance figures - the binding fixed price always follows the free site survey.
What factors into the quote
- Stone type and sensitivity - granite tolerates acidic cleaning, while marble and limestone etch within seconds; identification determines method, agent, and time per square metre
- Area and layout - a connected lobby floor costs less per m² than many small rooms; corners, stairs, and edges add manual work
- Method and finish - routine cleaning, polishing, crystallisation, and grinding carry different time and equipment costs; optional impregnation is priced separately
- Contract model - long-term framework agreements with periodic visits include agents, quality control, and site management; one-off restoration cleans are priced individually
Fixed price after the survey
An hourly rate pays for attendance, not the result - a fixed-price package pays for a defined result agreed in advance, so efficiency benefits us rather than increasing your bill. Every service is listed separately in the quote, and optional services such as grinding, impregnation, or crystallisation are clearly separated and never added silently. Agents, quality control, and site management are included; the binding fixed price is issued only after the free site survey. All figures are guidance values, not an offer - the actual price is determined during the property survey. Pricing overview.
FAQ About Stone Cleaning in Berlin
Answers about stone types, methods, intervals, and the stone cleaning process - prepared by our site management for property managers and commercial customers in Berlin.
How do you prevent damage to natural stone?
Do you also restore polished marble?
What about heritage protection?
Can you clean stone façades?
What does stone cleaning cost in Berlin?
Which cleaning intervals are available?
Which Berlin districts do you serve?
What does the on-site survey include?
Case Study: Hotel Lobby in Mitte
A representative example of how we restore a high-traffic marble lobby in central Berlin. The concrete figures vary depending on the property.
Starting situation: A hotel lobby in Mitte with 280 m² of polished marble. Years of foot traffic, cleaning-agent residue, and wine spills had dulled the surface. The hotel wanted to restore the original shine without replacement and without disrupting guests.
Assessment and plan: We tested a hidden area with reagent drops to confirm calcareous marble, then planned a three-step programme: diamond grinding to remove scratches, polishing to bring back the gloss, and crystallisation to harden the surface.
Implementation with a fixed team: A coordinated team executed the programme across three night shifts between 22:00 and 06:00. Optional impregnation was applied to reduce future staining, and guests used a side entrance during the work.
What changed for the property
- 280 m² of marble restored to original gloss
- Guest disruption avoided through night-shift planning
- Optional impregnation reduced future staining
- No replacement costs - surface preserved in place
- Hotel lobby guest-satisfaction rating rose measurably
This case study illustrates our approach and does not constitute an offer or refer to a specific named customer property.
What Our Customers Say in Berlin
Real Google customer reviews from property managers, businesses, and offices across Berlin.

Trust & Evidence
Insurance & Legal
- Fully covered by liability insurance (€3 million coverage)
- GDPR-compliant data processing
- Free on-site inspection & transparent fixed prices
- No minimum-revenue commitment, pilot projects available
Staff & Care
- 100 % directly employed staff, no subcontractors
- Dedicated site manager & personal contact person
- DGUV-compliant occupational safety, regular training
- Response within 24 hours, multilingual contacts (DE/EN/PL)
Quality & Documentation
- Cleaning aligned with DIN EN 13549, BIV quality standards
- Material identification and documented test areas before every deployment, heritage coordination experience
- Documented quality loops, monthly reports, digital records with timestamps and QR check-in
- Site managers in all 12 Berlin districts, emergency deployment within 90 minutes
What Our Customers Say
"The marble floor of our hotel lobby in Mitte was restored - grinding, polishing and impregnation brought back the original shine without damaging the soft stone."
- Hotel Manager, Mitte 2022
"Our office building in Charlottenburg has a large granite entrance area. After deep-cleaning and sealing, salt stains and wear marks are gone."
- Property Manager, Charlottenburg 2023
"The terrazzo staircase of our Kreuzberg tenement was cleaned with a gentle, material-appropriate method that preserved the historic surface beautifully."
- Building Owner, Kreuzberg 2021
Stone Cleaning in Every Berlin District
Hotel lobbies with marble - we grind, polish and impregnate soft stone without damage.
Historic terrazzo staircases - gentle methods preserve period surfaces.
Limestone and acid-sensitive stone - we apply pH-neutral, protective care.
Granite entrance areas - we remove salt stains and wear marks, then seal.
Shopping-centre floors - regular crystallisation keeps polished stone glossy.
Sandstone portals - we lift decades of grime gently to reveal original colour.
Spa wet areas - we remove limescale and soap residue from natural stone.
Restaurants with tiled floors - we remove grease while protecting grout.
Garden paving and terraces - we remove moss and slip hazards safely.
Estate entrances with mosaic - careful work preserves period character.
Industrial concrete floors - we degrease and seal for easier maintenance.
Granite steps and cladding - uniform, streak-free results across all areas.
Contact & Quote
Based on your details, we prepare a transparent, property-specific calculation for your stone cleaning. The assessment is carried out by our site management under Managing Director Dawid Marczyk. We usually reply within 24 hours on weekdays.
Back to Cleaning Company Berlin – central point of contact for commercial & property management








