Skip to main content
Construction Cleaning Berlin - Clean Sites, On-Time Handover
Professional construction cleaning (Baureinigung) to professional standards (Gebäudereiniger-Handwerk). Immo-Clean GmbH provides post-construction cleaning, renovation cleaning, and builder's clean services. Tariff-bound permanent staff with DIN EN 13549-aligned methods - calculation based on construction area & contamination level.
Construction Cleaning: On site across the city
Fixed teams cover rough cleans, intermediate stabilisation and final handover cleans for new builds, renovations and commercial builds in all 12 Berlin districts. Every visit is documented and signed off before the next phase.
- StandardsDIN EN 13549 · VOB/C · BIV
- TeamsFixed site-dedicated crews
- PhasesRough clean to handover clean
- EvidenceHandover protocol for acceptance
Phase prices cannot be read off a card - a shell rough clean and a final handover clean differ by crew, method, and acceptance criteria - minimum order values and area tiers are on the Pricing page, and the binding phase quote follows the free site walk.
Construction Cleaning: Fixed teams for new builds, renovations & handovers
The Construction Cleaning Berlin service from Immo-Clean GmbH covers every cleaning phase of a building project - from rough cleans during shell construction to the final seamless handover clean. Fixed cleaning teams, documented quality loops, and a dedicated site manager give project managers, contractors, and developers consistent, verifiable results.
Scheduling around active trades
We coordinate cleaning windows with the site manager and the trades, typically working off-peak, at weekends, or in cordoned zones so that cleaning does not interfere with other trades. The cleaning plan is part of the project schedule and is adjusted as the build progresses. Request a project quote.
Standards and acceptance
DIN EN 13549 defines the quality benchmark for building cleaning in Germany, the VOB/C regulates acceptance for construction services, and the BIV guideline sets industry-wide standards. We document compliance with all relevant frameworks and provide handover documentation suitable for VOB/C acceptance.
A dedicated site manager on site
Every project is run by a dedicated site manager who is the first contact for the project manager, the contractor, and the site supervisor, coordinates the cleaning team, and carries out quality checks - usually on site within 24 hours. Current site programmes run from high-rise new builds in Berlin-Mitte and fit-outs in Charlottenburg to housing handovers in Pankow, hall projects in Spandau, and riverside developments in Köpenick - the full footprint is on the Berlin service areas page.
Documented handover
After every visit, each team documents cleaning points, materials used, and anything unusual; the final handover clean comes with a written handover protocol suitable for VOB/C acceptance, and defects are identified during routine quality rounds, not just after complaints. Our office cleaning in Berlin, glass cleaning in Berlin, and stairwell cleaning in Berlin take over exactly where the build ends - and when the same client needs follow-up care, the maintenance cleaning in Berlin teams step in under a continuing framework.
Construction Cleaning in All Berlin Districts & Brandenburg
Construction cleaning is scheduled in three phases - rough clean after the shell, stabilisation cleans while trades finish, final handover clean with protocol - each phase with its own dust class, method, and acceptance criterion. We run these phase plans on sites across Berlin-Mitte, Charlottenburg, Friedrichshain, Kreuzberg, Spandau, Köpenick, Pankow, Neukölln, Wilmersdorf, Schöneberg, Tempelhof, and Steglitz - every region on the Berlin service areas page.
Berlin-Mitte & Eastern Districts
In Berlin-Mitte we serve new builds around the government quarter, in Friedrichshain large infill projects near the East Side Gallery, in Lichtenberg commercial new builds, and in Hellersdorf and Marzahn slab-building conversions.
Kreuzberg, Neukölln & Northern Districts
Construction cleaning in Kreuzberg is planned around SO36 and Bergmannkiez, while construction cleaning in Neukölln is coordinated around Hermannplatz and Sonnenallee. Pankow and Reinickendorf add housing-project handovers, where the final clean is timed to the occupation date, not the calendar.
Charlottenburg-Wilmersdorf & City West
City West builds are finish-heavy: tenant fit-outs along Charlottenburg's Kurfürstendamm, period-building conversions around Wilmersdorf's Olivaer Platz, and renovation final cleans in Schöneberg's Bavarian Quarter.
South, West & Brandenburg
In southern Berlin we cover Tempelhof, Steglitz, Zehlendorf, Lichterfelde, and Treptow. Spandau brings hall and logistics-shell projects with coarse rubble, Köpenick and Adlershof laboratory fit-outs with fine-dust limits. Site teams also mobilise to Potsdam and across Brandenburg.
Further Construction Cleaning Services
Construction Cleaning for Every Berlin Project Type
Every construction project has its own rhythm. We coordinate cleaning phases with the project schedule and the trades, working in zones matched to the dirt and accessibility.
New Build (Residential)
Rough cleans during shell construction, weekly stabilisation during finishing trades, and the final handover clean before key handover - all coordinated with the developer and the project manager.
Commercial New Build
Office and retail developments receive phased cleaning, with the final handover clean aligned with the tenant fit-out schedule - so the first user enters a sealed, dust-free space.
Renovation
Renovation cleaning covers dust, paint mist, adhesive residue, and minor damage. We work in cordoned zones so that occupied parts of the building remain usable.
Conversion
Conversions require coordination between demolition, construction, and cleaning. We map the zones and align our cleaning windows with the conversion schedule.
Heritage & Listed Buildings
Listed plaster, sandstone, and ornamental details require tested methods and pH-neutral agents. We document material tests in hidden spots so the result is predictable.
Hospital & Care Facilities
Construction cleaning in healthcare settings requires hygiene planning, disinfected tools, and RKI-oriented protocols. We work around infection-control requirements.
Hotel & Hospitality
Hotels and serviced apartments require final handover cleaning that meets guest expectations. Guest rooms, back-of-house areas, and public zones are cleaned on a clear schedule.
Office & Administration
Office fit-outs are cleaned in phases to match the fit-out schedule. The final handover clean is timed so the first day of the new tenant starts in a presentable space.
Industrial & Logistics
Industrial new builds and halls receive heavy-duty cleaning matched to the production schedule. Forklift traffic, dust loads, and shift plans are factored into the cleaning windows.
Retail & Shopping
Retail fit-outs require phased cleaning, with the final seamless handover clean before opening. Glass, signage, and product-display areas are cleaned with material-friendly methods.
Cleaners and Methods for Construction Surfaces
Choosing the right method protects new floors, glass, and façades. Before use, we check the surface, the soil, and material compatibility.
Dust-Class Products
Construction soil dictates the chemistry: cement haze lifters for stone and tile, residue-free glass cleaners after grout work, and HEPA-compatible dry products before any wet step - always tested on a hidden spot first.
Surface Handover Standards
Every floor leaves the site to a defined acceptance state: PVC and linoleum free of adhesive residue, natural stone without cement haze, parquet dust-free before sealing - slip resistance and value preservation verified, not assumed.
Glass Cleaning
For windows, glass façades, and partitions we use low-streak microfibre systems or purified-water cleaning, depending on height and access.
Paint-Mist & Adhesive Removal
Paint mist and adhesive residue are removed with material-tested solvents and mechanical methods. Sensitive coatings and sealants are protected.
Construction Cleaning in Eight Clear Steps
From the site walk to the signed handover protocol, every construction clean follows the same eight documented stages.
- Initial survey: we record construction area, phases, surfaces, access, and special hygiene requirements.
- Every phase and service is recorded with its scope, method, and defined result in a clear service specification.
- The site manager divides the project into rough, stabilisation, and final handover phases and plans routes, material stations, and time windows.
- A fixed team is briefed on site rules, HSE requirements, keys, and sensitive zones before the first deployment.
- HEPA-filtered vacuums, scrubber-dryers, cloths, and cleaning products are matched to the surfaces and project size and made ready for use.
- Rough and stabilisation cleaning follows the agreed phase schedule, with areas completed and unusual findings documented.
- The final handover clean is scheduled during the lockout window and aligned with VOB/C acceptance criteria.
- The closing handover protocol records every surface as accepted or flagged - the document your client signs, and the one that ends the cleaning discussion.
Case Study: New Build in Mitte
A representative example of how we take over and manage a construction cleaning project in Berlin. The concrete figures vary depending on the project.
Starting situation: A new build in Berlin-Mitte with 8,500 m² of office and retail space and three underground parking levels. Construction cleaning had been inconsistent during the trades phase: dust on completed surfaces, paint mist on metal frames, and a disorganised rough-clean phase. The handover deadline was tight.
Assessment and plan: We took over the cleaning scope in three coordinated phases: a rough clean during shell construction, a weekly stabilisation clean during finishing trades, and a final handover clean aligned with the VOB/C acceptance. Site-dedicated scrubber-dryers and HEPA-filtered vacuums were deployed for the final phase.
Implementation with a fixed team: A fixed site crew moved through the building phase by phase - rough clean after the shell, weekly stabilisation behind the trades, final clean in the lockout window - every phase signed off against the handover protocol before the next trade returned.
What changed for the project
- Handover deadline kept without extension
- 8,500 m² sealed dust-free for final acceptance
- Cleanliness rating of 4.7/5 stars at handover
- Three cleaning phases coordinated with the trades
- HEPA-filtered machines deployed for sensitive surfaces
This case study illustrates our approach and does not constitute an offer or refer to a specific named project.
What Determines the Price? A Worked Example
What construction cleaning costs is decided by the phase (rough, stabilisation, or final handover), the trades sequence on your site, and the area - each phase carries its own dust class, crew, and acceptance standard. The binding fixed price follows the free site survey.
What factors into the quote
- Construction area and phase - a rough clean after shell construction is less effort than a final handover clean after the trades finish
- Cleaning frequency - weekly stabilisation cleans during the trades keep the site ready and reduce the effort of the final handover clean
- Material and surface requirements - natural stone, parquet, glass, and metal each require different cleaning chemistry and tools
- Billing model - each phase (rough, stabilisation, final handover) is priced as its own package; the three-phase bundle costs less than booking phases separately
Fixed price after the survey
Construction cleaning is quoted per phase and result - for example "shell debris and coarse dust removed after topping-out" or "surfaces handover-clean, fine dust extracted, protocol signed" - because the phase sets the effort: a rough clean after the shell is machine-heavy and quick, the final clean after the trades is detail work measured against acceptance criteria, and the trades sequence in between decides how often stabilisation cleans must run. HEPA-filtered equipment, materials, and site management are inside the phase price; the binding figure follows the free site survey. Pricing overview.
FAQ About Construction Cleaning in Berlin
Answers about costs, phases, timing, and the construction cleaning process - prepared by our site management for project managers, contractors, and developers in Berlin.
Can you clean while other trades are still working?
Which cleaning phases are covered?
Do you provide daily or weekly schedules?
How do you handle VOB/C acceptance?
What does construction cleaning cost in Berlin?
Can you align with our site safety briefings?
What contract terms are possible?
What does the on-site survey include?
Further Articles About Construction Cleaning
Our guides explore specific aspects of construction cleaning in Berlin - from acceptance criteria and VOB/C to handover protocols and coordination with active trades. Every article is based on real Berlin project experience and provides practical decision support for project managers, contractors, and developers.
What Our Customers Say in Berlin
Real Google customer reviews from project managers, contractors, and developers across Berlin.
★★★★★
Site managers and handover teams award our Berlin construction cleaning excellent Google reviews for dependable deadline adherence and thorough removal of builder's dust – including the edges inspectors check first. Final-stage glass, frames and sanitary areas are documented, so acceptance dates hold.
"The final clean of our new build in Mitte was finished on schedule before handover. The dust-free surfaces and photo comparison convinced the client."
- Site manager, Mitte 2021
"After a full renovation in Charlottenburg, the team removed mortar splashes and paint mist without damaging the fresh parquet floors."
- General contractor, Charlottenburg 2022
"Our site in Kreuzberg had a tight handover deadline. Immo-Clean organised a weekend deployment so the date was kept."
- Project manager, Kreuzberg 2023
Trust & Evidence
Insurance & Legal
- Fully covered by liability insurance (€3 million coverage)
- GDPR-compliant data processing
- Commercial register: HRB 287028 B (Charlottenburg District Court)
- Phase prices fixed in writing before mobilisation - no hidden site costs
Staff & Care
- 100 % directly employed staff, no subcontractors
- A site manager who attends the construction meetings, not just the cleans
- Response within 24 hours on weekdays
- Multilingual contacts (DE/EN/PL)
Quality & Documentation
- Handover results measured against DIN EN 13549 and BIV standards, not against goodwill
- DGUV-compliant occupational safety training
- Digital phase records with QR check-in per storey and trade section
- Site managers in all 12 Berlin districts, emergency deployment within 90 minutes
Back to Cleaning Company Berlin – central point of contact for commercial & property management